Round 4 inch stainless steel Instrument Tubing Seamless EN10216-5 TC1 A+P OD 1/2''
Hydraulic tubes and instrumentation tubes in a comprehensive range of corrosion-resistant stainless steels and nickel alloys covering outside diameters from (OD) 1.59 to 50 mm (0.0625 to 1.968 in.). All sizes are supplied with smooth surfaces and close dimensional tolerances reducing the risk of leakages when connecting tubes with couplings.
Standard delivery form for Spezilla hydraulic and instrumentation tube is straight lengths of 6 meters, but our tubes can also be delivered as coiled tubing, contributing to reduced installation costs.
Tubes with high cleanliness
Spezilla hydraulic tubes and instrumentation tubes are characterized by high cleanliness, and tubes with OD larger than 5 mm (0.196 in.) are delivered with plugged ends for transport protection against inside contamination.
Standards:
EN 10216-5 TC1
ASTM A213-AW (average wall)
ASTM A269
PED 97/23/EC
OD <6 mm according to A632
NACE MR0175/ISO 15156
254 SMO (UNS S31254)
EN 10216-5 TC1
ASTM A269
PED 97/23/EC
NACE MR0175/ISO 15156
UNS N08904
EN 10216-5 TC1
ASTM A213 A269
PED 97/23/EC
NACE MR0175/ISO 15156
UNS N06625
ASTM B444, Grade 1 and Grade 2
ASME SB444, Grade 1 and Grade 2
ISO 6207
UNS S32750
EN 10216-5 TC1
ASTM A789
PED 97/23/EC
NACE MR0175/ISO 15156
Austenitic stainless steels:
| S34700/S34709 | 347/347H | 1.4550/1.4912 |
| S31635 | 316Ti | 1.4571 |
| S31603/S31600 | 316L/316 | 1.4404/1.4401 |
| S31603/S31600 | 316L/316 | 1.4435/1.4436 |
| S32100/S32109 | 321/321H | 1.4541/1.4940 |
| S30403/S30400 | 304L/304 | 1.4306/1.4301 |
Duplex stainless steels:
| S32750 | 1.4410 |
| S31803/S32205 | 1.4462 |
| S32304 | 1.4362 |
| UNS | ASTM | EN no. |
Nickel alloys and high-alloy austenitic stainless steels:
| N06600 | Alloy 600 | - |
| N06625 | Alloy 625 | 2.4856 |
| N08825 | Alloy 825 | - |
| N08800 | Alloy 800 | 1.4558 |
| N08028 | - | 1.4563 |
| N08904 | - | 1.4539 |
| S31254 | - | 1.4547 |
| N04400 | - | - |
| N02200 | - | - |
Testing of stock standard tubing in straight condition
Spezilla hydraulic and instrumentation tubing are tested according to the standards as follows.
| Standard | Tests chemical analysis | Tensile | Hardness | Flattening | Flaring | Corrosion | Hydrostatic |
| EN 10216-5 TC1 | S | S | - | S | S1) | - 4) | T 2) |
| ASTM A269 | S | - | S | - | S | - 5) | T 2) |
| ASTM A213 | S 3) | S | S | S | S | - 5) | T 2) |
| ASTM A789 | S 3) | S | S | - | S | - | T 2) |
| ASTM B668 | S | S | - 6) | - | S | - | T 2) |
| ASTM A632 | S | S | - 6) | - | S | - 5) | T |
S = Sampling, T = 100%
1) Either flaring or flattening test depending on tube size.
2) Eddy Current or hydrostatic test at option of Spezilla.
3) Also product analysis of a billet or tube from each heat.
4) Spezilla performs EN ISO 3651-2 Method A.
5) Spezilla performs ASTM A262 PrE.
6) Spezilla performs hardness test.
Product Tags:
|
|
Round 4 inch stainless steel Instrument Tubing Seamless EN10216-5 TC1 A+P OD 1/2'' Images
|
