SA213 SA312 316Ti Seamless Tube,heat exchanger stainless steel tube
TP316Ti Stainless Steel Pipe,ASTM A312 TP316Ti Pipe,ASTM A213 TP316Ti Stainless Steel Tube
The weldability of the 316Ti and 316L can be assumed to be similar. Neither of the grades can be expected to weld 'easier' or 'better' than-the-other. Niobium stabilised fillers (welding consumables) should be used for welding the 316Ti, especially where elevated temperature weld strength may be important. In other circumstances a '316L' filler should give a matching weld metal aqueous corrosion resistance to that of the 'parent' '316Ti' material.
TP316Ti Tubing, A213 TP316Ti Stainless Steel Tube
| Item Code: | TP316Ti |
| Tube OD.: | 1" 3/4" 25.4mm 19.05 |
| Wall: | 0.065'' |
| Length: | 20FT / 6096MM |
| Material: | TP316Ti |
| Standard: | ASME SA213 ASTM A213 ASTM A269 |
| Finish: | AP / Annealed & Pickled |
| Type: | Seamless Cold Drawn |
| Certification: | ISO9001:2015 |
| Mill Test Certificate: | EN10204 3.1 |
| Packing: | Sleeved, Wooden Boxed |
ASME SA213 316Ti Stainless Steel Tube Chemical Composition
| Weight % | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | Fe |
| TP316Ti | 0.08 max | 0.75 max | 2.00 max | 0.045 max | 0.030 max | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | 5×(C+N)-0.70 | Rem |
| EN 10216-5 1.4571 / X6CrNiMoTi17-12-2 | 0.08 max | 1.00 max | 2.00 max | 0.040 max | 0.015 max | 16.50-18.50 | 10.50-13.50 | 2.00-2.50 | 5×C-0.70 | Rem |
| AISI 316 Ti | 0.08 max | 0.75 max | 2.00 max | 0.045 max | 0.030 max | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | 5× (C+N)-0.70 | Rem |
Typical Manufacturing Specifications:
ASME SA213
ASTM A213
EN10216-5
Also individual customer specifications.
Quality Assurance:
Spezilla's ASME SA213 seamless stainless steel tubes are produced acc. to the following process and inspection to assure our quality:
1. Chemical Composition Analysis Test With 100% PMI.
2. Solution Annealing / Bright Annealed.
3. 100% Hydrostatic Test and 100% Eddy Current Test
4. Mechanical Tests includes Tension Test, Flattening Test, Flaring Test, Hardness Test.
5. Impact Test subject to Standard request.
6. Grain Size Test and Intergranular Corrosion Test.
7. Visual Test and Endoscope Test for Surface Quality Test
Our seamless stainless steel tubes undergo the following tests acc. to specifications:
Flattening Test:
One flattening test shall be made on specimens from each end of one finished tube, not the one used for the flaring test, from each lot.
Flaring Test:
One flaring test shall be made on speci- mens from each end of one finished tube, not the one used for the flattening test, from each lot.
Hydrostatic or Nondestructive Testing:
Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the type of test to be used shall be at the option of the manufacturer, unless otherwise specified in the purchase order.
Markings:
Markings will adhere to prescribed specifications in A999/A999M and shall include the NPS or OD and schedule number or average wall thickness, heat number, and NH (when hydrotesting is not performed) and ET (when eddy-current testing is performed) or UT (when ultrasonic testing is performed). The marking shall also include the manufacturer’s private identifying mark, the marking requirement of section 12.3 on Hydrostatic or Nondestructive Electric Test, if applicable, and whether seamless (SML), welded (WLD), or heavily cold-worked (HCW). For Grades TP304H, TP316H, TP321H & TP347H, the marking shall also include the heat number and heat-treatment lot identification.
Note:
Mill test certificates will be issued according to EN10204.1
All tubes shall be supplied as per applicable ASTM A213 /A213M Specification.
Available Tube Product Forms:
Straight.
Coiled.
Typical Applications:
- Food processing and handling
- Firearms production
- Heat exchangers
- Chemical process vessels
- Conveyors
- Architectural
Product Tags:
|
|
SA312 1.4571 316ti Seamless Stainless Steel Heat Exchanger Tube Images
|
